Technical information

ADC Telecommunications, Inc.
308 C
HAPTER 12: CONFIGURING IP ROUTING
Figure 12-5 Add IP Interface Window
3. Enter values for the parameters. Refer to Table 12-2.
4. Click OK to commit the changes or click Cancel to exit without saving.
Parameter Descriptions
This table provides a description of the Add IP Interface window
Table 12-2 .Add IP Interface Window Parameters
Parameter Description
IP Forwarding By default, IP Forwarding is Enabled for the interface.
Chassis/Slot/Inte
rface
Indicates the chassis, slot, and interface for which you wish to
add an IP interface.
IP Address Source IP address for packets originating at the interface.
Network Mask Network mask for this interface.