Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring for Backplane Clock Sources 297
Installed Means that Stratum clock is installed. Required
for supporting backplane clocks.
Not installed Means that stratum clock is not installed.
Backplane clocks are not supported on the
chassis.
Backplane Clock A Used to specify which clock source is driven
onto the primary clock.
None Not driven by any clock.
Bits A Driven by external clock bits A.
Bits B Driven by external clock bits B.
Internal Driven by Internal Stratum-3 oscillator
Backplane Clock B Used to specify which clock source is driven
onto the secondary backplane clock B.
None Not driven by any clock.
Bits A Driven by external clock bits A.
Bits B Driven by external clock bits B.
Internal Driven by Internal Stratum-3 oscillator
Parameter Description