Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Alarm Management 283
throttling value that you configure applies only to the Traps displayed by the
Alarm Table, not to the number of Traps sent to the alarm log.
To configure alarm throttling, use this procedure:
1. In the Alarm Management window, click the Alarm Log Throttling tab.
2. Enter values for the parameters: Refer to Table 11-4.
3. Perform one of these tasks:
■ Click Apply to commit the information
■ Click Reset to return to the previous values.
■ Click Defaults to return to the default values.
What You See
Figure 11-10 Alarm Throttling Window
Parameter Descriptions
This table provides a description of the Alarm Throttling window.
Table 11-4 Alarm Throttling Parameters.
Parameter Description
Alarm Delivery
Interval
Interval during which the system transmits Trap notifications.
By default, the Alarm Delivery Interval is set to 3 seconds.
Maximum
Alarms per
Interval
Maximum number of Traps that the system can transmit
during the specified alarm delivery interval. By default the
Maximum Alarms per Interval is set to 300. This means that
the system can generate a maximum of 300 Traps every 3
seconds