Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Alarm Management 277
Alarm Management
The Cuda 12000 allows you to configure alarms to identify fault events.
These alarms can notify you of potential fault conditions or configuration
errors that may impact system performance and network health.
Before You Begin
Before you begin navigate to Network Browser > GroupName >
ChassisName > Cuda Chassis Manager > Fault Management > Alarm
Management.
Configuring Trap Sources
To configure trap sources for an interface, follow this procedure:
1. In the Alarm Management window, click the Alarm Sources tab.The
Interface Summary window appears.
2. In the Enable Link Trap column, select the interface that you wish to
enable as the link trap. By selecting the check box, the link trap is
enabled. By clearing the check box, the link trap is disabled.
3. Click Apply to commit the information or click Reset to return to the
previous values.