Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
About Fault Management 269
To access the chassis view, follow this procedure:
1. In the Fault Management menu item, select the Universal View item. A
minimized view of the Cuda 12000 chassis appears.
2. To view the maximized chassis view, double-click on the picture. The
maximized view allows you to identify the chassis and displays each
module. A module that sends an alarm has been colored according to its
fault event. The view also shows the identifying chassis numbers, which
are located at the top left corner of the chassis: The examples includes:
■ 101 — A number assigned dynamically to the cluster.
■ 1/ — User-defined unique id number assigned to the chassis within the
network.
■ 13/ — Slot number that contains the management module.
■ 0/ —Internal management interface number.
■ 1 — Type of logical port on this interface. “1” indicates a main processor.
“2” indicates a daughter module processor.
What You See
This figure is a minimized view of the front of the Cuda 12000 chassis.
Figure 11-2 Universal View - Minimized
To see the maximized chassis view, double-click on the picture. The
maximized view allows you to identify the chassis.
This figure is a maximized view.