Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring LCP 261
Configuring LCP
The PPP protocol suite includes a Link Control Protocol (LCP) for establishing,
configuring and verifying point-to-point connections. PPP uses LCP to
determine encapsulation options, set limits in transmit and receive packet
size, detect link configuration errors, and terminate links.
LCP is defined in RFCs 1570 and 1661.
Configuring LCP Parameters
To configure LCP parameters for a selected PPP interface, follow this
procedure:
1. Click the LCP tab.
2. Click the Configure tab. The Configure window appears.
3. Click Apply to commit the information or click Reset to return to the
previous values.
What You See
Figure 10-17 LCP Configure Window