Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Gigabit Ethernet Duplex Mode 225
What You See
Figure 9-12 Gigabit Configuration Window
Parameter Descriptions
This table describes the Gigabit configuration parameters:
Table 9-14 Gigabit Configuration Parameters
Parameter Description
Auto-negotiation Configures the 10/100 Ethernet port to
automatically negotiate duplex mode and speed. By
default, the Cuda 12000 is set to auto-negotiation.
Duplex Sets the duplex mode on the 10/100 Ethernet port.
The options are:
■ Full - Sets the port to full-duplex mode (port can
send and receive simultaneously). Note that, if
you configure the port for full duplex or half
duplex, you also set the speed to its last explicit
setting (100 or 100).
■ Half - Sets the port to half-duplex mode (port
cannot sent and receive simultaneously).