Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring the POS Clock Source 201
6. To configure the POS module as the clock source for the primary clock
(A), choose Enabled for Card Drive Clock A.
7. To configure the POS module as the clock source for the secondary clock
(B), choose Enabled for Card Drive Clock B.
8. Click Apply to commit the changes.
Figure 9-3 Clock Synchronization Window
For more information about clock sources on the Cuda 12000, refer to
Chapter 5, “Chassis Management”. For more information about clock
connectors on the Cuda 12000, refer to the Cuda 12000 IP Access Switch
Installation Guide.