Technical information

ADC Telecommunications, Inc.
198 C
HAPTER 9: MODULE ADMINISTRATION
Managing Modules
You can reset and disable modules on your Cuda 12000, using the buttons
within the Card Summary window.
Buttons
This table provides a description of the button functions, within the Card
Summary window:
Ta b l e 9- 3 Card Summary Buttons
Resetting Modules
To reset modules, follow this procedure. (Refer to Table 9-3.):
1. Navigate to the Card Summary folder.
2. Click the Card Summary tab. The Card Summary window appears.
3. Click Refresh to update the information.
4. Select the row that includes the module that you want to reset.(Refer to
Figure 9-2.)
5. To reset and reboot the module, click the Soft Reset button.
6. To reset the module, but not reboot, click the Hard Reset button.
Enabling/Disabling Modules
You can set the module status to active or not active by toggling the
Enable/Disable Boot button; follow this procedure. (Refer to Table 9-3.):
1. Click the Card Summary folder.
2. Click the Card Summary tab. The Card Summary window appears.
3. Click Refresh to update the information.
Button Description
Refresh Updates the window with the current information.
Soft Reset Resets the module by rebooting the module.
Hard Reset Resets the module, but does not reboot the module.
Enable/Disable
Boot
Sets the module to active or non active status. Enabled
indicates active status. Disabled indicates not active status.