Technical information

ADC Telecommunications, Inc.
196 C
HAPTER 9: MODULE ADMINISTRATION
Viewing Module Topology
You may view a summary of the current system topology. The topology
information includes the following:
■ A list of all installed modules
■ The physical ports in which the modules are installed
■ Module status
■ Module software and hardware versions
■ Module description
To view the summary information, follow this procedure:
1. Navigate to the Card Summary folder.
2. Click the Card Summary tab. The Card Summary window appears.
(Refer to Figure 9-2.)
3. Click Refresh to update the information.
Parameter Descriptions
This table provides a description of the summary information available for
installed modules.
Ta b l e 9- 2 Card Summary Window Parameters
Parameter Description
Chassis Unique ID you assigned to the chassis
Slot Number of the physical chassis slot in which the card resides.
For information on how slots are numbered, see the “Cuda
12000 Installation Guide”.
Card Type The module type that is installed in the chassis.
Boot Time Date and time that the interface came online and initialized
with the management module.
Boot Mode Indicates whether the module is enabled or disabled. Enabled
indicates the module is active. Disabled indicates the module
is not active.
System
Description
Provides the following information about a module: