Technical information

ADC Telecommunications, Inc.
168 C
HAPTER 7: SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP)
Selecting Module-related Notification Types
Module notification types refer to hardware faults that affect any application
module.
Follow this procedure to select the notifications for module-related system
operations:
1. In the Notifications Type window, click the Module tab. The Module
window appears.
2. Select the notification types for which you want to be notified. Refer to
Table 7-17.
3. Click Apply to commit the changes or click Reset to return to default
values.
Authentication Failure SNMP receives a bad
Community Name.
Notice
Trace Log For ADC internal use only. Notice
Controller Module
Failover Down
Redundancy services are
going down. This notification
type applies to only redundant
configurations.
Notice
Controller Module
Failover Up
Redundancy services are up.
This notification type applies
to only redundant
configurations.
Notice
Controller Module
Software Mismatched
The secondary module does
not come up because its
software revision does not
match the software revision of
the primary module. This
notification type applies to
only redundant
configurations.
Notice
Parameter Description Event Level