Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Selecting SNMP Notification Types 165
Selecting SNMP Notification Types
Notifications types are specific faults associated to system operations. The
Cuda 12000 supports notification types for the following system operations:
■ Cluster
■ Module
■ Interface
■ DOCSIS
■ Routing
■ Provisioning (Provisioning-related faults are supported only if you are
using the FastFlow Broadband Provisioning Manager (FastFlow BPM.)
Notification types are sent to the SNMP Hosts that are configured to receive
SNMP Notifications. (NOTE: You must configure SNMP Notifications before
you select SNMP Notification Types.) Notification types are associated with
system event levels. The Cuda 12000 supports the following event levels:
■ Critical
■ Warning
■ Notice
■ Error
■ Informational
For more information about event levels, refer to Chapter 8, “Managing
System Events”.
This section describes the notification types and explains how to select
notification types for system operations.
Before You Begin
Before you configure SNMP Notification Types, follow this procedure:
1. Navigate to Network Browser>GroupName>ChassisName> Cuda
Chassis Manager>Configuration>Chassis Configuration.
2. In the Summary window, select the chassis, slot, and interface that you
want to configure.