Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring SNMP Communities 153
Adding an SNMP Community
Follow this procedure to add an SNMP community:
1. In the Communities window, click Add in the Communities table. The
Add Community window appears.
2. Enter values for the parameters. Refer to ().
3. Click Ok to add the community or click Cancel.
What You See
Figure 7-15 Add Community window
Parameter Descriptions
This table provides a description of the Add Community window.
Mask Mask value that associates this host with the group. The
mask allows any host in a range. For example, 220.220.0.0
has a mask of 255.255.0.0. This allows any host from
220.220.0.0 through 220.220.255.255.
Parameter Description
Parameter Description
Community
Name
Name of the community
Group Name of the associated group.
Context Name of the associated context.
Storage Type Storage type for this entry.