Technical information

ADC Telecommunications, Inc.
148 C
HAPTER 7: SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP)
Parameter Descriptions
This table provides a description of the Add View window
Table 7-10 SNMP Add View Window Parameters.
Modifying an SNMP Access View
Follow this procedure to modify an SNMP access view:
1. From the Views window, select the group you wish to modify.
2. Click Modify. The Modify View window appears.
3. Update the necessary information.
4. Click Apply to commit the changes or click Cancel to exit without
saving.
Parameter Description
View Name Name of the view. The range is 1 to 32 characters.
MIB Subtree MIB subtree that defines the family of view subtrees. You
can enter the MIB value in various formats. For example you
can enter the MIB value as an Object Identifier (OID), an OID
with wildcards, or an OID name description, such as,
sysDescr.
View Access Indicates whether the corresponding instances of the MIB
subtree are Included or Excluded from the MIB view.
Storage Type Storage type for this entry.
Volatile Entry is stored in volatile memory. The information is lost
during a system reboot.
Non-volatile Entry is stored in non-volatile memory. The information is not
lost during a system reboot.
Permanent Entry is stored in non-volatile memory. You cannot delete the
information but you can make modifications.
Read-only Entry is stored in non-volatile memory. You cannot delete or
modify the information.