Technical information

ADC Telecommunications, Inc.
144 C
HAPTER 7: SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP)
Parameter Descriptions
This table provides a description of the Add Groups window parameters
Ta b l e 7- 9 SNMP Add Groups Window Parameters.
Modifying SNMP Groups
Follow this procedure to modify an SNMP group:
1. In the Groups window, select the group you wish to modify and click
Modify. The Modify Group window appears.
2. Update the necessary information.
3. Click Apply to commit the changes or click Cancel to exit without
saving.
Parameter Description
Group Name Name of the group
Context Name of the associated context
Security Model Security model that processes SNMP messages. The options
are V1, V2c, or V3.
Security Level Security level necessary to gain access rights to the group.
The options are: NoAuth (no Authentication), Auth
(Authenticated), and Priv (Private).
Read View Authorizes read access to the group
Write View Authorizes write access to the group
Notify View Authorizes access for notifications.
Storage Type Storage type for this entry.
Volatile Entry is stored in volatile memory. The information is lost
during a system reboot.
Non-volatile Entry is stored in non-volatile memory. The information is not
lost during a system reboot.
Permanent Entry is stored in non-volatile memory. You cannot delete the
information but you can make modifications.
Read-only Entry is stored in non-volatile memory. You cannot delete or
modify the information.