Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring SNMP Groups 141
Configuring SNMP Groups
The purpose of configuring a group is to differentiate access with respect to
specific combinations of context, security model, security level, and view
access. You may add, modify, and delete groups.
SNMPv1 and SNMPv2c do not recognize context separately, but do
recognize context when you have associated it with a Group, as described in
the next procedure.
Before You Begin
Before you configure groups, follow this procedure:
1. Navigate to Network Browser>GroupName>ChassisName> Cuda
Chassis Manager>Configuration> Chassis Configuration.
2. In the Summary window, select the chassis, slot, and interface that you
wish to configure.
3. Click the Agent Configuration tab. The Agent Configuration window
appears.
4. Click the Groups tab. The Groups window appears. Refer to Figure 7-8.