Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring SNMPv3 Contexts 131
What You See
Figure 7-3 Add Context window.
Parameter Descriptions
This table provides a description of the Add Context window
Ta b l e 7- 3 SNMPv3 Add Context Window Parameters.
Modifying SNMPv3 Contexts
Follow this procedure to modify an SNMPv3 context:
1. In the Contexts window, click Modify. The Modify Context window
appears.
2. Modify the required options. Refer to Table 7-4.
Parameter Description
Context Name Name that identifies a context. A name that is of zero
length indicates a default context.
Storage Type Storage type for this context.
Volatile Entry is stored in volatile memory. The information is lost
during a system reboot.
Non-volatile Entry is stored in non-volatile memory. The information is
not lost during a system reboot.
Permanent Entry is stored in non-volatile memory. You cannot delete
the information but you can make modifications.
Read-only Entry is stored in non-volatile memory. You cannot delete
or modify the information.