Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring SNMP Agent Parameters 127
Configuring SNMP Agent Parameters
Follow this procedure to configure SNMP agent parameters and view
statistics:
Procedure
1. Navigate to Network Browser> GroupName>ChassisName> Cuda
Chassis Manager > Configuration > Chassis Configuration
2. Click the Summary tab.
3. In the Summary window, select the chassis, slot, and interface that you
wish to configure.
4. Click the Agent Configuration tab.
5. In the Agent Configuration window, click the Snmp tab. The Agent
Configuration window appears.
6. Enter values for the parameters. Refer to Table 7-2.
7. Click Apply to commit the changes.
8. Click Refresh to update the information.