Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring a Chassis 111
Configuring a Chassis
Configuring a chassis consists of these functions:
■ Assigning or changing chassis and cluster IDs.
■ Defining in which slot the Primary module resides.
■ Defining if the Primary module is managing a cluster or independent
chassis environment.
Figure 5-1 is an example of the Summary window. This window displays
chassis identification information for only the primary management module.
(Configuration information for the Agent Configuration tab is explained in
Chapter 7, “Simple Network Management Protocol (SNMP)”. Configuration
information for the Event Configuration tab is explained in Chapter 8,
“Managing System Events”.)
Figure 5-1 Chassis Configuration Summary Window