Installation guide
Table Of Contents
- About This Guide
- Hardware Overview
- Preparing for Installation
- Rack-Mounting the System
- Installing Modules
- Cabling the System
- Powering On and Powering Off
- Configuring Network Access
- System Specifications and Compliance
- Martek Power Supply
- Wiring Diagrams
- Glossary
- Index
3
RACK-MOUNTING THE SYSTEM
This chapter describes the preparations for rack-mounting the Cuda 12000
and instructions on how to rack-mount a Cuda 12000 chassis and
components. This chapter includes:
■ Rack-Mount Installation Components
■ System Placement in the Rack
■ Rack-Mount Order
■ Rack-Mounting the Intake Plenum
■ Rack-Mounting the Fan Tray
■ Rack-Mounting the Chassis
■ Rack-Mounting the Exhaust Plenum
CAUTION: Before proceeding with the procedures in this chapter, read
Chapter 2, “Preparing for Installation.”
Rack-Mount Installation Components
The Cuda 12000 is designed for mounting in a TIA/EIA-compliant 19”-wide,
Telco-style rack. You can rack-mount up to three systems in a single 7’ rack.
A proper rack-mount system installation is comprised of these components:
Chassis Cuda 12000. For information on how to rack-mount the
chassis, see “Rack-Mounting the Chassis” on page 71.
Fan tray The fan tray consists of six fans for optimal air flow and
cooling of a single chassis. A fan tray is required for each
rack-mounted chassis. For example, a three-chassis
installation requires 3 fan trays.