Installation guide

2
PREPARING FOR INSTALLATION
This chapter provides safety information, site requirements, and other
information for installing Cuda 12000 components. This chapter contains:
■ Installation Overview
■ Safety Guidelines
■ Site Requirements
■ Pre-Installation Considerations
■ Tools for Installation
Installation Overview
The installation process for the Cuda 12000 is described in these steps.
Please refer to the detailed instructions for each step before attempting to
install the system or any of the components.
1. Review safety guidelines, contained in “Safety Guidelines,” next.
2. Prepare the site, as described in “Site Requirements” on page 60.
3. Unpack the system and components.
4. Rack mount the system, as described in Chapter 3, “Rack-Mounting the
System.”
5. Install system modules, as described in Chapter 4, “Installing Modules.”
6. Cable the System, as described in Chapter 5, “Cabling the System.”
7. Connect the Power, as described in “Connecting Power” on page 109.
8. Power On the system, as described in Chapter 6, “Powering On and
Powering Off.”