Installation guide
Table Of Contents
- About This Guide
- Hardware Overview
- Preparing for Installation
- Rack-Mounting the System
- Installing Modules
- Cabling the System
- Powering On and Powering Off
- Configuring Network Access
- System Specifications and Compliance
- Martek Power Supply
- Wiring Diagrams
- Glossary
- Index

Cuda 12000 IP Access Switch Installation Guide
Notations 11
Notations
This table lists the text notations that are used throughout the Cuda 12000
documentation set.
Conventions Used in This Guide
■ Text formatted in italics indicates information that provides important tips
or warnings.
■ A description of each numbered callout in the module graphics,
excluding the Management module, can be found in Table 1-2 on page
26.
Related Documentation
For more information on the Cuda 12000, see these publications:
■ Cuda 12000 IP Access Switch CudaView Administration Guide — A
procedural guide containing all the information that you need to
configure the system using the graphical user interface (GUI).
■ Cuda 12000 IP Access Switch CLI-based Administration Guide — A
procedural guide containing all the information that you need to
configure the system using the command line interface (CLI).
■ Cuda 12000 IP Access Switch CLI Reference Guide — A reference
guide containing all the information about the commands used to
configure and manage the Cuda 12000 using the command line
interface (CLI).
Icon Notice Type Description
Information Note
Important or useful information,
such as features or instructions
Caution
Information that alerts you to
potential damage to the system
Warning
Information that alerts you to
potential personal injury