Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
chassis-fault 81
blue Enables blue alarms, which one or more modules generate when they
detect a blue alarm condition. A blue alarm occurs when an
intermediate device that is currently experiencing a red alarm
condition passes alarm information along to the device at the
opposite end. The no form of the command disables the alarm.
fan-rotation Enables the alarm that generates when the fan tray in the chassis
detects one or more non-rotating fans. The no form of the command
disables the alarm.
fan-temp Enables the alarm that generates when the fan tray in the chassis
detects an inlet temperature greater than 50 degrees celsius. The no
form of the command disables the alarm.
local-pwr-a Enables the alarm that generates when chassis management software
detects a loss of Power_A (48V). The no form of the command
disables the alarm.
local-pwr-b Enables the alarm that generates when chassis management software
detects a loss of Power_B (48V). The no form of the command
disables the alarm.
processor-temp Enables the alarm that generates when chassis management software
detects a processor over-temperature condition.
ps-ac Enables the alarm that generates when the power supply in the
chassis detects loss of one or more AC inputs. The no form of the
command disables the alarm.
ps-dc Enables the alarm that generates when the power supply in the
chassis detects a DC power out-of-range fault. The no form of the
command disables the alarm.
ps-temp Enables the alarm that generates when the power supply in the
chassis detects an over-temperature condition. The no form of the
command disables the alarm.
red-alarm Enables red alarms, which one or more modules generate when they
detect a red alarm condition. A red alarm results from loss-of-signal.
The no form of the command disables the alarm.
yellow Enables yellow alarms, which one or more modules generate when
they detect a yellow alarm condition. A yellow alarm indicates that a
remote device is transmitting a red alarm. The no form of the
command disables the alarm.