Technical information

ADC Telecommunications, Inc.
76 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
ccdown
Shuts down the management module. Use this command before powering off the management
module or Cuda 12000 system.
Note that shutdown of the management module starts immediately after entering this
command. When the management module has shut down all running processes, the controller’s
LCD displays the message
Stopped, after which you can safely power down or restart the
system.
Only use this command if you have physical access to the system. After issuing this command,
you will need to hit the reset button on the management module to reboot the module.
Mode
root
Syntax
ccdown