Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
boot 67
boot
Use this command to disable the card, bring it online, or perform a hard reset from the CLI.
Mode
root
slot(<c/s>)
Syntax
boot {enabled | disabled | reset} slot <c/s>
Arguments
Example
cli:172.16.19.10:slot(1/11)# boot reset
cli:172.16.19.10:slot(1/11)#
Related Commands
■ reset on page 350
{enabled | disabled |
reset}
Specifies one of the following values:
■ enabled – Brings the module back online. Issuing this command
when the module is disabled boots the module.
■ disabled – Brings the module down. Issuing this command disables
the module.
■ reset – Hard boots the module in the current slot. This is the
equivalent of pressing the reset button on the module faceplate.
slot <c/s> Applies to root mode only. Specifies the slot that you want to reset.