Technical information

ADC Telecommunications, Inc.
614 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
upstream <port number> voice-bw-reserve
Reserves a percentage of upstream bandwidth for voice traffic on the current interface. If the
admission control function is enabled on the current interface, the upstream <port number>
voice-bw-reserve command sets aside bandwidth for use by unsolicited grant service (UGS) and
UGS with activity detection (UGS/AD) service flows. Refer to the description of the
admission-control command on page 51 for information on enabling the admission control
function.
Mode
interface:cable:csi(<c/s/i>)
Syntax
upstream <port number> voice-bw-reserve <number>
Arguments
<port number> Number of upstream port (1-4 for 1x4 modules or 1-6 for 1x6
modules) for which you want to set aside a percentage of
bandwidth for UGS and UGS/AD service flows.
voice-bw-reserve
<number>
Specifies the percentage of upstream bandwidth that you want
to set aside for UGS and UGS/AD service flows. Values range
from 0.0 to 100.0. The default is 75.0 percent.
You may specify a whole number (for example, 60) or a decimal
number (for example, 70.5).