Technical information

ADC Telecommunications, Inc.
610 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
upstream <port number> range-backoff
Sets the range backoff for the specified upstream port.
Mode
interface:cable:csi(<c/s/i>)
Syntax
upstream <port number> range-backoff <start range> <end range>
Arguments
Example
Related Commands
■ show interface cable <c/s/i> mac on page 421
■ show upstream on page 547
<port number> Number of the upstream port (1-4) for which you want to set the
power level.
<start range> Start of range backoff for this upstream port. Valid numbers: 0 – 15.
<end range> End of range backoff for this upstream port. Valid numbers: 0 – 15.
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# upstream 1 range-backoff 0 15
cli:172.16.19.10:interface:cable:csi(1/1/1)# show upstream 1 | include Ranging
Ranging Backoff Start 0
Ranging Backoff End 15
cli:172.16.19.10:interface:cable:csi(1/1/1)#