Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
upstream <port number> data-backoff 601
upstream <port number> data-backoff
Sets a data backoff range on the specified upstream port. By default, the data backoff range is
set to 5. Acceptable values are 0 to 15.
Mode
interface:cable:csi(<c/s/i>)
Syntax
upstream <port number> data-backoff <start-value> <end-value>
Arguments
Example
Related Commands
■ show interface cable <c/s/i> mac on page 421
■ show mac on page 454
<port number> Number of upstream port for which you want to set the data
backoff range. Valid range is 1 to 4 for 1x4 modules and 1 to 6
for 1x6 modules.
<start-value> Start of the data backoff range. Valid numbers: 0 –15.
<end-value> End of the data backoff range. Valid numbers: 0 –15.
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# upstream 1 data-backoff 5 10
cli:172.16.19.10:interface:cable:csi(1/1/1)# show upstream 1 | include "Tx Back"
Tx Backoff Start 5
Tx Backoff End 10
cli:172.16.19.10:interface:cable:csi(1/1/1)#