Technical information

ADC Telecommunications, Inc.
600 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
upstream <port number> channel-width
Sets the upstream channel width in kilohertz (kHz).
Mode
interface:cable:csi(<c/s/i>)
Syntax
upstream <port number> channel-width {200 | 400 | 800 | 1600 | 3200}
Arguments
Example
Related Commands
■ show interface cable <c/s/i> mac on page 421
<port number> Number of upstream port for which you want to set the
channel width. Valid range is 1 to 4 for 1x4 modules and
1 to 6 for 1x6 modules.
channel-width
{200 | 400 | 800 | 1600 | 3200}
Specifies the upstream channel width in kilohertz (kHz). By
default, the Channel Width is set at 3200 kHz (2560
kilosymbols - ksyms). Acceptable values include:
■ 200K (160 ksyms per second)
■ 400K (320 ksyms per second)
■ 800K (640 ksyms per second)
■ 1600K (1280 ksyms per second)
■ 3200K (2560 ksyms per second)
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# upstream 1 channel-width 800
cli:172.16.19.10:interface:cable:csi(1/1/1)# show upstream 1 | include Width
Channel Width 0.8 (MHz)
cli:172.16.19.10:interface:cable:csi(1/1/1)#