Technical information

ADC Telecommunications, Inc.
598 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
ucd-interval
Use this command to set the time interval between sending successive Upstream Channel
Descriptor messages for each upstream channel. The UCD interval specifies how frequently an
Upstream Channel Descriptor message is transmitted on every active upstream.
Mode
interface:cable:csi(<c/s/i>)
Syntax
ucd-interval <value>
Arguments
Example
Related Commands
■ show interface cable <c/s/i> mac on page 421
■ show mac on page 454
<value> Time interval in milliseconds. The valid range is 1 to 2000. The
default is 2000 milliseconds.
cli:172.16.19.10:root# interface cable 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# ucd-interval 1000
cli:172.16.19.10:interface:cable:csi(1/1/1)# show mac | include UCD
UCD Interval 1000 (millisec)
cli:172.16.19.10:interface:cable:csi(1/1/1)#