Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
traffic-relay 597
Example
cli:192.168.208.3:root# traffic-relay dns port 55
cli:192.168.208.3:root# show traffic-relay
row count: 10
Protocol State Port Number
------------ -------- -----------
tftp enable 69
time_of_day enable 37
syslog enable 514
dns enable 55
snmp disable 161
telnet disable 23
ssh disable 22
http enable 80
ftp disable 21
snmp-trap enable 162
cli:192.168.208.3:root#
Related Commands
■ show traffic-relay on page 545
ssh Enables traffic relay for the secure shell server. The no form of the
command disables traffic relay for the secure shell server.
syslog Enables traffic relay for the syslog server. The no form of the command
disables traffic relay for the syslog server.
telnet Enables traffic relay for the Telnet server. The no form of the command
disables traffic relay for the Telnet server.
tftp Enables traffic relay for the TFTP server. The no form of the command
disables traffic relay for the TFTP server.
time_of_day Enables traffic relay for the Time-of-Day server. The no form of the
command disables traffic relay for the Time-of-Day server.
port <port> Specifies a TCP or UDP port to be used by the specified process for traffic
relay. For example, if the HTTP server on the Cuda 12000 uses a port other
than the default (80), you can use this argument to specify the non-default
port.