Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
trace-log 591
nlbg-cmts – CMTS-related bridge-group events. nlbg-rs – Route-server-related bridge-group
events.
ospf – OSPF protocol events. ospf-debug – OSPF debug events. For ADC
developer debug use only.
ospf-hello – OSPF hello packet events. ospf-spf – OSPF SPF events.
ppp – PPP events. ppp-debug – PPP debug events. For ADC
developer debug use only.
prov-rmi – Errors related to the provisioning
server/CudaView interaction.
rbp – Events related to the ADC proprietary
reliable IPC mechanism.
rcv – The receive module within the switching
layer.
relay-to-syslog – Events related to relaying
messages to the SYSLOG server.
rip – Not used. rip-console – Extensive debug of RIP, provides
function level debugging. For ADC developer
debug use only.
rip-debug – RIP debug events. For ADC
developer debug use only.
rip-general – Miscellaneous RIP events.
rip_mem – Events related to RIP memory
allocation.
rip-route – Events related to route updating.
rip-rx – Events occurring during RIP receive
packet handling.
rip-state – Events related to internal RIP states.
rip-task – Events which occur within the main RIP
task.
rip-timer – Events related to RIP periodic timers.
rip-tx – Events occurring during RIP transmission. rm – Resource Manager events.
routing-trace – Trap based debugging for all
routing protocols. Misconfigurations would be
caught here.
short-msg – Short message events.
snmp – Events related to the SNMP protocol. sw – Switching Layer events.
switching-tftpd – Switching events related to
the TFTP server.
syslog-server – SYSLOG Server events. Only valid
on slots 13 and 14.
tcp – TCP events. tftp-server – TFTP Server events. Only valid on
slots 13 and 14.
time-server – Time Server events. Only valid on
slots 13 and 14.
tracelogd – Tracelog Server events. Only valid on
slots 13 and 14.
udp – UDP events.
Table 2- 4 Software Component IDs