Technical information

ADC Telecommunications, Inc.
590 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
The following table lists the software component IDs that you can specify for monitoring
within slot mode:
Debug commands are for ADC use only.
Table 2- 4 Software Component IDs
agentx – Events related to the agentx protocol
between the master SNMP agent on the BCM
and the and local agents on the I/O modules.
basctlr – Events related to the management
controller. Only valid on slots 13 and 14.
ca – SNMP issues on the BCM. cfg-rmi – Communications issues related to the
configuration process.
cfm – Configuration File Manager. cli – Command Line Interface events. Only valid on
slots 13 and 14.
cmts – CMTS events other than MAC and BPI. cmts-<0-17> – CMTS event levels 0 through 17.
For example: cmts-0. For ADC developer debug
use only.
cmts_bpi – Baseline Privacy events. cmts-docsis-err – DOCSIS specific errors.
cmts-generic – General CMTS events. cmts-mac – MAC only events.
courier – Courier events. crp – Not used.
dhcp-relay – Events related to DHCP on an
application module.
dhcp-server – DHCP Server events. Only valid on
slots 13 and 14.
dns-server – DNS Server events. Only valid on
slots 13 and 14.
faults-rmi – Errors related to processing alarms.
ftd – Events related to distributing the IP
forwarding table.
ha-interface – Errors related to the high
availability (HA) interface. This interface is part of
support for fault tolerant redundancy.
icmp – ICMP events. idle – The idle task.
igmp – IGMP events. ip – IP forwarding events.
ip-debug – Extensive debug of IP, provides
function level debugging. For ADC developer
debug use only.
java-server – Java server supporting CudaView
and CLI.
jni – Events related to the Java Network Interface,
which is required for multi-chassis support.
la – SNMP local agent on slots 1 – 12.
ldap-client – Events related to the LDAP client. ldp – Link Discover Protocol on slots 1 - 12.
log – log task. ma – SNMP Master agent (slot 13 or 14 only).
mal – Management Access Layer which supports
both CLI and CudaView.
mcast – Multicast-related events.
mtd – MTD-related events. nlbg – Bridge-group events.