Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
spectrum-group reset upstream 581
spectrum-group reset upstream
Resets an upstream channel back to policy 1.
Mode
interface:cable:csi(<c/s/i>)
Syntax
spectrum-group reset upstream <channel-id>
Arguments
Example
cli:192.168.208.3:interface:cable:csi(1/1/1)# spectrum-group reset upstream 1
cli:192.168.208.3:interface:cable:csi(1/1/1)#
Related Commands
■ show spectrum-group on page 535
■ spectrum-group on page 579
<channel-id> Specifies the ID of the upstream channel that you want to set
back to policy 1. Values range from 1 to 4 for 1x4 modules
and 1 to 6 for 1x6 modules. Use the show spectrum-group
command to display upstream channel IDs.