Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show spectrum-group 535
show spectrum-group
The show spectrum-group commands allow you to display various information about the
frequency hopping configuration on the upstream channels.
Mode
interface:cable:csi(<c/s/i>)
Syntax
show spectrum-group upstream
show spectrum-group <rule number> upstream
show spectrum-group upstream <channel number>
show spectrum-group <rule number> upstream <channel number>
show spectrum-group stats upstream <channel number>
show spectrum-group stats upstream
Arguments
Example 1
This example displays the policy configuration for all upstream channels.
cli:192.168.208.3:interface:cable:csi(1/1/1)# show spectrum-group upstream
row count: 4
Rule Upstream Threshold Interval Frequency Profile
Number ID (MHz) Num
------ -------- --------- -------- ---------- -------
1 1 1 10 5.0 1
2 1 1 10 5.0 1
3 1 1 10 5.0 1
2 2 1 86400 42.0 1
cli:192.168.208.3:interface:cable:csi(1/1/1)#
<rule number> The user-defined number assigned to a policy
configuration (1, 2, 3, 4, or 5). Five policies may be
configured for each upstream channel.
<channel number> The upstream channel port on which the policy is set. Valid
range is 1 to 4 for 1x4 modules and 1 to 6 for 1x6
modules.