Technical information

ADC Telecommunications, Inc.
504 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
show privacy multicast
Displays the following information:
■ Mappings of multicast IP addresses and SAs
■ Multicast SA for each cable modem
Mode
Any.
Syntax
show [interface cable <c/s/i>] privacy multicast
{ip [<index>] | mac [<mac-address>]}
Arguments
interface cable <c/s/i> Specifies the cable interface for which you want to display the IP
multicast SA mappings. Note that this argument is not required
if you are in interface:cable:csi(<c/s/i>) mode.
ip [<index>] Specifies that you want to display the IP multicast SA map table.
Optionally, you can specify an index value to display a specific
entry in the table. Index values range from 1 to 10000.
mac [<mac-address>] Specifies that you want to display cable modems and their
associated multicast SAs. Optionally, you can specify a cable
modem MAC address to display details on a specific cable
modem.