Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show mta <mac-address> server 487
show mta <mac-address> server
Displays the following parameters that the MTA uses to initialize when it boots up:
■ DHCP, DNS, and SNMP servers
■ Boot state
■ URL of the configuration file that the MTA downloads from the TFTP server or HTTP server
Mode
interface:cable:csi(<c/s/i>)
Syntax
show mta <mac-address> server [read-community <string>]
Arguments
Example
cli:interface:cable:csi(1/1/1)# show mta 00:20:40:c0:4a:ba server
S l o t 1
MAC Address 00:20:40:c0:4a:ba
IP Address 172.16.1.33
SID 115
CID 0
CPE 0
D:U 1:1
Power 0 (dbMV)
Timing ******
Modem State Registered
Boot State
DHCP Server 172.16.2.1
DNS 1 Server 172.16.2.1
DNS 2 Server 0.0.0.0
Config File TFTP://[172.16.2.1]/Moto4500_g1.cfg
SNMP Entity [172.16.2.1
<mac-address> Specifies the MAC address of the MTA in xx:xx:xx:xx:xx:xx format.
read-community <string> Specifies an optional community string for read access to the
server, boot state, and configuration file URL.