Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show mta <mac-address> ncs 483
cli:interface:cable:csi(1/1/1)# show mta 00:20:40:c0:4a:ba ncs endpoint
S l o t 1
MAC Address 00:20:40:c0:4a:ba
IP Address 172.16.1.33
SID 115
CID 0
CPE 0
D:U 1:1
Power 0 (dbMV)
Timing ******
Modem State Registered
row count: 2
Call Agent ID Call Agent UDP
Port
---------------- ----------------
2427
2427
The command output is divided into two sections. The top section displays information that
you can display using the show modem command. The bottom section displays the
following MTA-specific fields when you use the config argument:
Field Description
Echo
Cancellation
Displays whether echoes are cancelled (True or False). True indicates that echo
cancellation is in use. False indicates that echo cancellation is not in use.
Silence
Suppression
Displays whether silence is suppressed in the send direction (True or False). True
indicates that silence suppression is enabled. False indicates that silence
suppression is disabled.
Connection
Mode
Displays the various ways in which the MTA can connect to the network (such as
voice, fax, and modem).
R0 Cadence Displays ring cadence intervals, where each bit represents a duration of 200
milliseconds (6 second total).
R6 Cadence Displays ring cadence intervals, where each bit represents a duration of 200
milliseconds (6 second total).
R7 Cadence Displays ring cadence intervals, where each bit represents a duration of 200
milliseconds (6 second total).
Def Call
Signal TOS
Displays the default Type of Service (ToS) value for call signalling (signals for
setting up calls) in the IP header.