Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show modem <mac-address> 469
cpe-hosts Displays the CPE devices associated with each cable modem.
No CPE devices appear if the CMTS cannot discover IP
addresses for the specified cable modem.
service-flow
{classifier [<cid> | phs] |
log [<log-id>] |
parameter-set [<type>] |
stats | upstream}
Displays details on the DOCSIS 1.1 Service Flow that the CMTS
assigns to the specified cable modem at registration.
You may combine the service-flow argument with one of the
following additional arguments:
■ classifier [<cid> | phs] – When issued without any
arguments, displays information on the packet classifier and
payload header suppression (PHS) filter against which
packets are matched. Optionally, you can display details on
a specific classifier ID (with the <cid> variable) or PHS filter
(with the phs keyword).
■ log [<log-id>] – Indicates the unique identifier for a logged
Service Flow, when issued with no <log-id> argument.
Optionally, you can display details on a specific log ID.
■ parameter-set [<type>] – Displays the type and QoS
parameter characteristics of the Service Flow assigned to
this interface. Valid Service Flow types are 1 (active),
2 (admitted), and 3 (provisioned).
■ stats – Displays statistics for this Service Flow.
■ upstream – Displays only upstream statistics for this Service
Flow.