Technical information

ADC Telecommunications, Inc.
468 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
cm {bpi-base | bpi-plus
{base | tek} | bpi-tek | device
[event {config | control |
list}] | downstream |
interface | mac | qosprofile |
service | signal-quality |
status | system | upstream}
[read-community <string>]
Specifies one of the following values:
■ bpi-base – Displays BPI base information for the cable
modem.
■ bpi-plus {base | tek} – Displays BPI plus information for the
cable modem. The base argument displays BPI plus base
information. The tek argument displays BPI plus traffic
encryption key (TEK) information.
■ bpi-tek – Displays BPI TEK information for the cable modem.
■ device [event {config | control | list}] – Displays device status
and control information for the cable modem. Optionally,
you can specify the event argument, which displays event
configuration information, event control information or a
list of events that the cable modem has generated.
■ downstream – Displays downstream channel information
for the specified cable modem.
■ interface – Displays information on the CPE Ethernet
interface, MAC interface, downstream interface, upstream
interface, and diagnostic Ethernet interface.
■ mac – Displays the attributes of the specified cable
modem’s MAC interface.
■ qosprofile – Displays the attributes of the specified cable
modem’s QoS profile.
■ service – Displays upstream service queue attributes for the
specified cable modem.
■ signal-quality – Displays the physical layer signal quality of
downstream channels for the specified cable modem.
■ status – Displays several status fields and counters for the
specified cable modem.
■ system – Displays standard MIB II system group objects for
the specified cable modem (contact, system name, and
location).
■ upstream – Displays upstream channel information for the
specified cable modem.
Optionally, you can follow each of these arguments with the
read-community keyword followed by a community string.
cm-filter Displays upstream and downstream filters for cable modem
traffic and for CPE traffic that the specified cable modem
processes.
cpe-control Displays subscriber management parameters for CPE
associated with the specified cable modem.