Technical information

ADC Telecommunications, Inc.
466 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
Example 8
The following example displays the subscriber management parameters for all cable modems
on an interface:
cli:192.168.208.3:interface:cable:csi(1/1/1)# show modem cpe-control
row count: 12
MAC Address IP Address MAX IP Active Learnable
----------------- --------------- ---------- ---------- ----------
00:10:95:04:0a:b7 201.1.1.109 16 True True
00:90:96:00:39:f9 201.1.1.101 16 True True
00:10:95:04:0a:c3 0.0.0.0 16 True True
00:90:83:36:82:ee 201.1.1.108 16 True True
00:10:95:01:f0:05 201.1.1.103 16 True True
00:10:95:04:0a:c4 201.1.1.110 16 True True
00:90:96:00:29:6d 201.1.1.104 16 True True
00:90:96:00:29:71 201.1.1.112 16 True True
00:90:83:32:9f:8c 201.1.1.106 16 True True
00:10:95:01:ef:d8 201.1.1.100 16 True True
00:90:96:00:39:7f 201.1.1.102 16 True True
00:90:83:36:82:f1 201.1.1.107 16 True True
Example 9
The following example displays a CPE device that uses the cable modem with the MAC
address of 00:90:83:36:82:f1. Note that “Learned” indicates that the CMTS discovered the
CPE IP address through upstream packets that were sent by the CPE.
cli:interface:cable:csi(1/1/1)# show modem 00:90:83:36:82:f1 cpe-hosts
MAC Address 00:90:83:36:82:f1
IP Address 201.1.1.111
row count: 1
CPE IP Address CPE MAC Address Source
---------------- ----------------- -----------
201.1.2.100 00:b0:d0:72:b2:93 Learned
Related Commands
■ show interface cable <c/s/i> modem on page 423
■ show modem <mac-address> on page 467
■ show modem summary on page 478