Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show modem 461
Example 1
The following is an example of show modem in root mode. The output is a display of the
status of all cable modems. Except for the slot number, the same output is displayed by
show modem in interface:cable:csi(<c/s/i>) mode.
cli:192.168.220.230:root# show modem
row count: 4
S MAC Address IP Address SID CID CPE D:U Power Timing Modem
l (dbMV) State
o
t
-- ----------------- --------------- ---- ---- --- --- ------ ------ --------
1 00:20:40:c0:82:08 201.0.0.102 538 1 0 1:1 0 1904 Registered
1 00:20:40:6f:88:7e 201.0.0.100 540 1 0 1:1 0 1907 Registered
1 00:10:18:00:20:65 201.0.0.103 539 1 0 1:1 0 1126 Registered
1 00:a0:c5:23:f6:6c 201.0.0.101 536 1 0 1:1 0 1906 Registered
service-flow [<sfid>]
{classifier [<class-id>] |
log [<log-id>] |
parameter-set [<type>] |
stats | upstream}
Within interface cable <c/s/i> mode. Displays the 32-bit Service
Flow Identifier (SFID) assigned by the CMTS at registration
when issued without the <sfid> argument. When issued with
the <sfid> argument, displays details on the specified service
flow.
You may combine the service-flow argument with one of the
following additional arguments:
■ classifier [<class-id>] – Displays the classifier to which
incoming packets are matched, when issued without the
<class-id> argument. Optionally, you can display details on
a specific classifier ID.
■ log [<log-id>] – Indicates the unique identifier for a logged
Service Flow, when issued with no <log-id> argument.
Optionally, you can display details on a specific log ID.
■ parameter-set [<type>] – Displays the type and QoS
parameter characteristics of the Service Flow assigned to
this interface. Valid Service Flow types are 1 (active),
2 (admitted), and 3 (provisioned).
■ stats – Displays statistics for this Service Flow.
■ upstream – Displays only upstream statistics for this Service
Flow.