Technical information

ADC Telecommunications, Inc.
460 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
Arguments
interface cable <c/s/i> Within root or interface cable <c/s/i> mode. Specifies the
chassis, slot, interface of the cable modem for which you want
to display the status.
<mac-address> <arguments> Within root or interface cable <c/s/i> mode. Specifies the MAC
address for this cable modem, followed by additional
arguments. See the description of show modem
<mac-address> on page 467 for more information.
cm-filter Within interface cable <c/s/i> mode. Displays, for each cable
modem, the cable modem upstream and downstream filter
group assignments and the CPE upstream and downstream
filter group assignments.
cpe-control Within interface cable <c/s/i> mode. Displays the subscriber
management parameters for each cable modem.
cpe-hosts Within interface cable <c/s/i> mode. Displays the CPE devices
for each cable modem. No CPE devices appear if the CMTS
cannot learn IP addresses for the specified cable modem.
stats Within interface cable <c/s/i> mode. Displays upstream and
downstream byte and packet counts for each cable modem.
counts Within interface cable <c/s/i> mode. Displays network statistics
for each cable modem.
upstream <channel-id> Within interface cable <c/s/i> mode. Displays cable modems on
the specified upstream channel.