Technical information

ADC Telecommunications, Inc.
444 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
show ip filter
Use this command to show whether packet filtering on a selected cable interface is enabled or
disabled.
Mode
interface:cable:csi(<c/s/i>)
Syntax
show ip filter
Example
cli:172.16.19.10:interface:cable:csi(1/1/1)# show ip filter
IP Filter In enable
IP Filter Out disable
cli:172.16.19.10:interface:cable:csi(1/1/1)#
Related Commands
■ access-class on page 45
■ access-list on page 47
■ ip filter on page 185