Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show ip address 443
show ip address
Displays the IP interfaces configured on the current interface. Note that you configure IP
interfaces using the ip address command.
Mode
interface:<type>:csi(<c/s/i>)
Syntax
show ip address
Example
cli:192.168.208.3:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:192.168.208.3:interface:cable:csi(1/1/1)# show ip address
Chassis/Slot/Interface 1/1/1
IP Address Net Mask Interface Priority
---------------- ---------------- ---------- ----------
192.168.19.50 255.255.255.0 8781825 Primary
row count: 1
cli:192.168.208.3:interface:cable:csi(1/1/1)# ip address 192.167.30.3
255.255.255.0
cli:192.168.208.3:interface:cable:csi(1/1/1)# show ip address
Chassis/Slot/Interface 1/1/1
IP Address Net Mask Interface Priority
---------------- ---------------- ---------- ----------
192.167.30.3 255.255.255.0 8781825 Primary
192.168.19.50 255.255.255.0 8781825 Other
row count: 2
cli#
Related Commands
■ ip address on page 183
■ show ip interface on page 445