Technical information

ADC Telecommunications, Inc.
396 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
show cpu-utilization
Displays CPU utilization for both the network processor and Pentium processor on installed
modules. All forwarding modules utilize a network processor; only DOCSIS/EuroDOCSIS modules
and route server modules utilize the additional Pentium processor.
After you enable CPU utilization using this command, you can then use the show
cpu-utilization feature to display CPU usage for these module processors.
Use the no cpu-utilization command to turn this feature off.
Mode
slot(<c/s>)
Syntax
show cpu-utilization {1 | 2} {h | d | m}
Arguments
1 Displays CPU utilization for the network processor. Applicable to all
forwarding modules.
2 Displays CPU utilization for the on-board Pentium processor. Applicable
only to DOCSIS/EuroDOCSIS modules, and modules configured as the
route server.
h Displays CPU usage for a 1 hour duration in 1 minute intervals.
d Displays CPU usage for a 1 day duration in 1 hour intervals.
m Displays CPU usage for a 1 minute duration in 5 second intervals.