Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show controllers 393
Example
cli# root
mode: root
cli# show controllers pos 1/3/1
--from itable -----------------------------------
Interface Type 39
POS 1/3/1 (line protocol) closed
--from bassonetline table------------------------
Section: LOF 0
Section: LOS 0
Section: BIP(B1) 0
Line: AIS 0
Line: RDI 0
Line: FEBE(M1) 0
Line: BIP(B2) 0
Clock Recovery: LOC 0
--from bassonetpath table------------------------
Path: AIS 0
Path: RDI 0
Path: FEBE(G1) 0
Path: BIP(B3) 0
Path: LOP
--from bassonetmediumconfig table-----------------
--from bassonetmediumstatus table----------------
Framing Sonet
--from bassonetalarmreport-table------------------
Report alarms for B1 enabled
Report alarms for B2 enabled
Report alarms for B3 enabled
Report alarms for LAIS enabled
Report alarms for LRDI disabled
Report alarms for PAIS disabled
Report alarms for PLOP enabled
Report alarms for PRDI disabled
Report alarms for SD-BER disabled
Report alarms for SF-BER enabled
Report alarms for SLOF enabled
Report alarms for SLOS enabled
Threshold for SD report 7
Threshold for SF report 4
--from bassonetalarm-table------------------------