Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
show cm-filter 389
show cm-filter
Displays filters for cable modem and CPE traffic. Issuing the command with no arguments
displays all filters on the CMTS.
Mode
root
Syntax
show cm-filter [<group-id> [<index>]]
Arguments
Example
cli:192.168.208.3:root# show cm-filter 2 1
Group 2
Index 1
Src Address 0.0.0.0
Src Mask 0.0.0.0
Dest Address 144.133.1.0
Dest Mask 255.255.255.0
Protocol tcp
TOS 00
TOS Mask 00
Action deny
Matches 0
Source Port 65536
Destination Port 65536
TCP Flag Values
TCP Flag Mask
Related Commands
■ cm-filter on page 88
<group-id> Specifies the group ID (a number between 1 and 60) that identifies the
filter group. This displays all filters in the group.
<index> Specifies the index number of a filter within the group. This displays
details on the specified filter only.