Technical information

ADC Telecommunications, Inc.
386 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
show chassis-config
Shows the current chassis configuration, including:
■ chassis-number — Number assigned to the chassis (default chassis number is 101).
■ ChassisID — Identifies the chassis.
■ clusterID — Displays the chassis cluster ID. The default is 0, which is the recommended
value.
■ Manager — Indicates the slot number of the primary management module and the slot
number of the secondary management module. The system supports two management
modules for Management Module Redundancy.
■ Scope — One of the following:
Chassis — The management module can be used to configure only the current system.
Cluster —
The scope of this management module is cluster-wide. This is the default
configuration as the current release supports a single-chassis configuration only.
Mode
Any.
Syntax
show chassis-config
Example
cli:172.16.19.10:root# show chassis-config
Chassis Number: 101
Chassis Id: 1
Cluster Id: 0
Primary Manager Slot: 13
Secondary Manager Slot: None
Scope: Cluster
Related Commands
■ chassis-config on page 78