Technical information

Cuda 12000 IP Access Switch CLI Reference Guide
Command Modes 33
cm First element in various cable modem and subscriber
management commands, such as cm modify active,
cm reset, and so on.
cm-filter Creates a cable modem filter.
cm-offline Configures several offline cable modem parameters for
the current interface.
dhcp-authority Adds a DHCP authority range. The command also
enables and disables DHCP authority.
dhcp-policy Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
dhcp-relay Configures various DHCP relay agent options, such as
the IP addresses of cable modem, CPE, and MTA
gateways.
downstream Configures the downstream channel.
flap-list Controls the size of the flap list.
insertion-interval Configures the modem insertion interval.
link-trap Enables link traps for the interface.
map-timer Configures the map timer interval.
modulation-profile Configures modulation profiles, which contain burst
properties for upstream data channels.
periodic-ranging-
interval
Configures how the interface periodically invites
modems to range.
plant-delay Configures the estimated plant propagation delay.
pll-state Configures the phase lock loop state for the interface.
privacy Configures BPI plus parameters for the interface.
proxy-arp Enable proxy ARP on the interface.
qos Enables SNMP and cable modem access to the QoS
tables on the CMTS.
ranging-attempts Configures the number of times that a cable modem is
invited to range before being removed from the
system.
shared-secret Configures a shared secret on the current CMTS
interface.
shutdown Enables you to administratively shut down an interface.
Table 1- 3 DOCSIS Interface Mode Commands
Command Description